Archive for the ‘camera’ Category

A 3D display isn’t a new discovery, but its recent surge in popularity is clear, from 3D movie releases to expensive 3D TVs. Enhancing the optical illusion of depth perception is a unique process. The technique essentially happens by presenting two offset images separately to the left and right eye of the viewer. To make the offset images create depth, you then put on those funny looking glasses. Though attractive, these systems are expensive and lack interactivity.

 

The professors at Tsinghua University set out to change those deficiencies. Carrying out the task of creating a new 3D display system that was interactive and used real objects was a challenge. The process began with creating a virtual model. The team used NI LabVIEW software to read the model document and subsequently set parameters in order to project a new image. The new image was then displayed on an inverted optical structure. Once the image was displayed, they used a USB camera, NI PXI hardware, and NI Vision assistant to recognize movement and control the 3D display.

The final steps were to create a system that would actually show the 3D image. The team used a turntable controlled with PXI hardware and the NI 1764 Smart Camera. Together, these tools captured images and gathered information from all directions while the object rotated, allowing users to choose images they wanted to exhibit for the final 3D display.


displayrealobject.jpg

     3D display of real object


By using LabVIEW software with tools such as NI Smart Camera and Vision Assistant, professors at Tsinghua University were able to conquer their 3D challenge. They created a 3D system display that was interactive, inexpensive, and didn’t require special glasses. 

 

>>Learn more about LabVIEW and the 3D display system

We just introduced new additions to NI reconfigurable I/O (RIO) technology – a reconfigurable Camera Link frame grabber, a motion module for the NI CompactRIO platform, and six new custom brushless DC motors.

 

Ideal for advanced inspection and imaging applications, the NI PCIe-1473R frame grabber is a PC-based embedded vision board that combines FPGA technology with a Camera Link interface. The new frame grabber’s onboard FPGA can be programmed with the NI LabVIEW FPGA Module for custom image processing and analysis in real time. It also features a high-bandwidth 850 MB/s Camera Link bus to support a range of Camera Link configurations and includes Power over Camera Link (PoCL) wireless capabilities, removing the need for additional cables or external power supply.

 

For advanced motion control challenges, the NI 9502 motion drive module for CompactRIO can power brushless, stepper or brushed servo motors directly with NI C Series modules to provide a compact, highly customizable motion drive solution. With 4 A continuous/8 A peak current, multiple commutation modes and direct connectivity with our six new three-phase brushless DC motors and integration with LabVIEW FPGA, the NI 9502 helps engineers implement proprietary custom drive control algorithms, eliminating the need for custom firmware from a drive manufacturer.

 

Check out the frame grabber at www.ni.com/vision and learn more about the drive modules and motors at ni.com/motion.